How to Reduce Wastewater in RO System-6 Solutions

How to reduce wastewater in ro system.An RO system filters water and removes particulates and contaminants by passing water through many membranes, i.e., a sediment filter, carbon filter, and a semi-permeable membrane.

Water is purified by passing through these membranes, and finally, after filtration, water flows to a storage tank.

Water with rejected pollutants is sent down to the drain as wastewater because when water flows through the filter, it is divided into two main streams.

One stream contains filtered water for the storage tank, and the other contains salt and other pollutants to the drain.

Reverse osmosis systems use this water to clean additional water, just like we use water to wash our clothes and dishes, but it is our job to reduce the wastage of water.

How to Reduce RO Wastewater-6 Solutions

Different ways to reduce RO wastewater:

You can follow some given steps to reduce the RO waste water in your RO system:

Choosing the RO system:

You need to choose the RO system with an automatic shut-off valve. This valve saves water from waste by stopping water flow to the drain after the storage tank is full.

Save water:

You can use a long pipe with a drain that can deposit RO waste water outside your kitchen.

Using this method, you can store RO wastewater in the tank outside the kitchen, and it can be used in households, but you can’t use this RO waste water for yourself and your pets, but you can use it for washing purposes.

The wastewater by RO system has a high TDS (total dissolved solids), but it can be used in your lawn or garden. You can reuse the waste of water in washing dishes or use it in your garden or home.

See also  Can Zero Water Make You Sick-Ultimate Guide

Recycle wastewater:

You can reuse RO waste water by recirculating it into the system. Some reverse osmosis can reuse this wastewater to filter it again.

Remember, this RO wastewater contains a high level of TDS. These pollutants, salt, and solids in the wastewater can damage the RO system while circulating in the system.

Permeate pump:

You can add a permeate pump to your RO system to reduce waste water. Adding permeate pimp can reduce the RO waste water by up to 75% to 80%.

Be sure that it is designed to use it before installing permeate pump. Only some RO systems are designed to use permeate pumps.

Increase water pressure:

You can maximize the efficiency of your RO system by pressuring the water. Water pressure level affects the level of RO waste water.

The suitable water pressure for a RO system is 35-40 PSI. Less than appropriate pressure can result in much more RO waste water.

Maintain RO system:

RO system needs to be maintained carefully. It would help if you changed RO filters every 2-3 years, depending on the model and usage of the RO system, to enhance its efficiency.

You will regularly need to check the RO membranes and replace them if there’s a need to replace them, properly maintained RO system has less wastewater.


Is it possible to reduce RO wastewater?

yes, you can reduce RO wastewater by following some measurements. Yon can also increase its efficiency by properly maintaining RO system.

Is it useful to save and use RO wastewater?

You can save RO wastewater in a tank and this water can be used in households but it is not suitable to use wastewater for yourself and your pet.

See also  Brita Water Filter not Working-6 Quick Reasons

Also Read: Fluval Filter not Working After Cleaning-Best Guide


The RO system provides filtered and pure water. But rejected water with pollutants deposits in the drain can cause RO waste water.

You can reduce RO waste water by applying measurements and maintaining the RO system.

Leave a Comment