Viqua Water Filter Beeping-Quick Solutions

Viqua water filters are used to purify water. It provides great-tasting water free of sediments, contaminants, and other particles that affect the taste and quality of water.

You can use this viqua water filtration system anywhere, in your office or house. Sometimes your viqua water filter starts beeping, and you need help understanding why it is.

If you are facing the same problem, this article will help you know the reason for the viqua water filter beeping and the measurements that you can use to solve the issue for which the viqua water filter is beeping.

Viqua Water Filter Beeping-Quick Solutions

Reasons why your Viqua water filter is beeping

The ultraviolet system starts beeping when there is any issue or something that needs to be changed or fixed. Some reasons are given below.

  • Maybe the lamp is defective or burned out.
  • When there was a power failure and power came back, the ballast may initiate the alarm.
  • The controller, which measures the UV intensity, dose, and temperature, may be defective.
  • You may have kept the timer for a year or more, and it is time to change it.
  • The other reason can be that you have just changed the lamp but forgot to reset the timer.
  • When you have a monitored system, the sensors generate an alarm when the water quality becomes so poor or below the acceptable quality range.
  • Maybe the sensor is dirty; check and clean it.
See also  New Brita Filter not Letting Water Through-Reasons

Guide to solving the problem when the Viqua water system is beeping

  1. Unplug the Viqua water filter, wait for a few seconds now, plugin again and press the reset button for some time. Wait for the continuous beep; now you can release the reset button; if LED displays 365, your Viqua water filter usually works.
  2. If your Viqua water filter is beeping due to power failure, then you can fix it by following some simple steps, such as unplugging it, waiting for a while and plugging it in again; it will stop the water filter from beeping or alarming.
  3. When you notice that water quality is good and the sensor used by the monitoring system is also clean, you have reset the timer, and you have replaced the lamp recently and it is working well, then the issue is ballast. When everything is fine, but the Viqua water filter beeps, it means there is a defective ballast; you need to replace it.
  4. If you need to reset the lamp changing reminder, first you need to disconnect the UV power supply, wait for a few seconds, reconnect it to the AC supply, and do not press the reset button now. The ballast and UV dynamic system will discharge a three-second beep representing the successful reset. If you notice it flashing 12 times, it has served for 12 months.
  5. If you do not have LED in the timer, you need to press the buttons near to ballast. If it stops beeping, it means the lamp’s life service is about to end.If you do not replace it in one week, the beeping will start again.(After trying for possible times if your Viqua water filter is beeping, you can contact the manufacturer to get help)
See also  How to Clean Water Filter Faucet-Quick Solution


Is beeping indicates any issue?

Yes, the beeping is an alarming situation that tells us something is wrong, or any part needs to be replaced.

What to do when the Viqua water filter beeping does not stop?

When the Viqua water filter beeping does not stop, you must replace the lamp because its life service is about to end.

Also Read: Can Zero Water Make You Sick-Ultimate Guide


Viqua water filter starts beeping when there is any issue in its parts. Pay attention to this, try to find out what is wrong with the filter, and try to troubleshoot the problem. When you ignore the problem, it can affect the working of your water filter.

Leave a Comment