Fluval Filter not Working After Cleaning-Best Guide

A Fluval filter is an excellent performance canister filter that is providing many outstanding features that are designed to make aquarium fish keeping easier. The Fluval filter needs to be cleaned after a while, at least after a month, to ensure organic pollutants are not affecting the quality of water. This cleaning helps in the maintenance of the Fluval filter. When you clean the Fluval filter and use it again, you find out the Fluval filter is not working after cleaning. This issue needs to be troubleshot.

Steps to troubleshoot the Fluval filter not working after cleaning

Step 1: Dispel trapped air

To solve this issue, unplug the filter but still under the water you need to turn it upside down and give it a shake. Trapped air will be dispelled. Turn on the filter after repositioning it.

Fluval Filter not Working After Cleaning-Best Guide

Step 2: Check the circuit is working.

If Fluval filter is not working after cleaning, You need to check the circuit the filter is plugged in. Check if it is properly working because circuits connected to fluval filter are easily overloaded. You can simply unplug the filter and pug in any other electronic device to check if it is working. If circuit is not working you can change it, but if the circuit is working, there are chances that the filter motor is burned out. Now you need to replace your filter motor.

Step 3: Check the impeller assembly.

If fluval filter not working after cleaning or you hear any noise, check the impeller assembly because when it is placed improperly, it will make noise. It would help if you changed its position to make it properly seated, turn it clockwise at 270 degrees and fix it.

See also  Berkey Water Filter Running Slow-Explained All Reasons

Step 4: Prime your filter

You can prime your filter. Take one or two cups of water from the aquarium now open the hinged top of the filter and pour water. This process will prime the mechanism of the filter.

Step 5: check bends in the tube

When the Fluval filter is not working after cleaning, there may be bends or kinks in the tube that slow down water flow and increase pressure on the filter.

FAQ

Why is my Fluval filter not working after cleaning?

The Fluval filter may stop working after cleaning because of circuit issues and may slow down working due to bends in the tube and improperly seated impeller assembly.

How to fix the Fluval filter not working after cleaning?

You can fix Fluval filter when you find out Fluval filter not working after cleaning, you can find out the reason of filter not working by using different methods and you can solve the exact problem by following different measurements.

What to do when the Fluval filter is not working after cleaning and the filter motor is burned out?

When your filter motor is burned out you can’t do anything with it. You can replace the current motor with a new filter motor. Remember you don’t need to change the entire fluval filter you can change the filter motor only.

Also Read: Everpure Water Filter Leaking-Ultimate Guide

Conclusion:

The Fluval filter needs to be cleaned after some time for maintenance, and you should be careful while cleaning it. when you don’t follow instructions in result your fluval filter will stop working. You can troubleshoot this problem if your Fluval filter not working after cleaning by following different steps and improve its working.

Leave a Comment